20 Amp, 240V 5m Single Phase  Extension Lead Rubber Insulated

20 Amp 

Australian Standard

Rubber Insulated Extension Lead

3 Flat Pins.

Length: 5 m

Australian Standard single phase extension leads.

These abrasive resistant rubber insulated extension leads are recommended for indoor, outdoor and harsh environments where the ambient temperature is below 40°C.

(Intermittent use: Ambient temperature above 40°C below 45°C)

Applications: 

• Wet and oily environments
• Construction site leads
• Submersible Pumps 
• Flexible connections to motors, generators, compressors e.g.
  • Drills & pumps
  • Saws & log splitters
  • Cranes & Hoists
  • Handheld drills
  • Grinders & welders
  • Agricultural equipment 
  •  Generators
  • 240V Vacuums & floor grinders. etc

• Event and temporary cabling e.g. 
  • fairgrounds 
  • sporting venues
  • Stage & theater power.

The extension lead is suitable for dry, damp environments; areas of stress caused by vibration or impact they are resistant to abrasion, exposure to radiated heat and chemical contamination. Because of the black, flame retardant sheath, it is suitable for areas subject to fire hazard and hazardous locations like engineering workshops.

Maximum Ambient temperature: 40°C

Maximum Continuous Length:  30m (with a 3% voltage drop)

Maximum current at 40°C: 20A

Cable  Specifications:

Cable CSA:2.5mm²

Max Voltage: 06/1kV

Insulation: Ethylene-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 deg C to +90 deg C (mobile) -40 deg c to +90 Deg C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail order store, and customer pickup is Pick-Up is not available. 

EEC reserves the right to substitute the cable for cable of equal quality and specifications.